HALFEN HBT Reverse Bending Connection

HALFEN GmbH

Description

HALFEN backbend connections are used for the rational connection of concrete components that are manufactured and connected to each other in different phases. The storage box is made of galvanized sheet steel with special beads and a pre-punched handle hole for easy removal of the cover from the housing profile. It can be attached to the reinforcement by simply nailing it to the formwork or with rod wire.

More Over

The HALFEN HBT backturn connection enables a simple and efficient connection of reinforced concrete components that are concreted in different construction phases.

The pre-curved brackets are located in a housing consisting of a back and lid. HALFEN offers the housings in different profile widths. The lid is removed after the first concreting section has been stripped and the brackets are bent back.

Technical Information

Standard element lengths: 1.25 m and 0.80 m, other lengths on request
7 different profile widths for components to be connected from a thickness of 6 cm
13 different bracket types available for single- and double-layer connections Rod
diameters: 8, 10 and 12mm
Brackets:
a) B500B
b) Stainless steel B500B NR available (on request)
Reduced box heights. Due to their reduced box height, HALFEN backbend connections are ideal for slender components or precast concrete elements with low concrete overlaps
Box heights:
h = 24 mm for bar Ø 8 mm
h = 30 mm for bar Ø 10 mm
h = 36 mm for bar Ø 12 mm

Downloads