Gravel strips made of aluminium

Optigrün international AG

Description

Optigrün aluminium gravel strip for separating green roof structures and gravel strips, for forming cleanliness strips and fire protection strips at roof edges, rising components, facades, roof breakthroughs, etc., as a design element, e.g. for guiding gravel strips in the green area, for freeing up drainage facilities (e.g. pressure drainage).

More Over

Application:

As a separation between substrate, gravel edge and/or covering surfaces
Not suitable as a statically effective edge upstand on the eaves edge
Not suitable as a statically effective gravel strip in the pitched roof area > 5° DN.

Special features:

Smooth surface
Load held
Quadruple folded Water
permeable with perforations Ø 6 mm in the vertical leg
ATTENTION: If the material is not filled on both sides, it is necessary to use strips with thicker material for the sizes ZP 150A and ZP 200A.
Available in different material thicknesses, hole sizes and shapes

LV text

Technical Information

Material Aluminium
Nominal thickness 1.0 mm
Perforation 6.0 mm
Bonding hole without
colour Aluminium Natural
Dimensions ZP 60A: H 60 x W 85 x L 2500 mm

ZP 80A: H 80 x W 93 x L 2500 mm

ZP 100A: H 100 x W 73 x L 2500 mm

ZP 120A: H 120 x W 140 x L 2500 mm

ZP 150A: H 150 x W 117 x L 2500 mm

ZP 200A: H 200 x W 160 x L 2500 mm

Accessories Connector for longitudinal joints Corner element for inner/outer corner formation 90°-180°
Quantity/delivery unit Individually as uncut bar profiles with a length of 2.5 m
Delivery form according to the scope of order as a parcel shipment, or on a special pallet by a freight forwarder.
approx. 750g/m

ZP 80A: approx. 800g/m

ZP 100A: approx. 850g/m

ZP 120A: approx. 900g/m

ZP 150A: approx. 1,000g/m

ZP 200A: approx. 1,400g/m

Downloads