More Over
Application
KOROMINERAL CURE is used on freshly applied, smoothed and sanded concrete surfaces and industrial floors, as a post-treatment against premature drying out in accordance with DIN 18353 DIN 18560, at the same time surface protection (impregnation) against moisture, dirt and wear, to reduce water penetration depth, improve frost/thaw resistance and treat dusty and sanding concrete floors. For indoor and outdoor use.
Features
processing
Mix KOROMINERAL CURE before application. After that, the application should be started immediately. To prevent the active ingredient from settling, an attachable low-pressure sprayer with permanent material mixing is recommended. KOROMINERAL CURE must not be diluted. The application can be done directly after the last smoothing cycle. Blood water and use too early or too late can impair the aftercare effect and the surface appearance. Apply KOROMINERAL CURE evenly in strips. Do not apply too much material. Joints and/or joint profiles should serve as a natural boundary. Apply KOROMINERAL CURE only once. Tools can be cleaned with commercially available lye.
Delivery form
25 l plastic container
Storage
Store in a dry, frost-free container and not ≥ 30 °C in the sealed original container. Close opened containers immediately. Shelf life approx. 12 months.
Technical Information
Form: liquid
Colour: milky white
Density: 1.12 g/cm3
pH value: approx. 11 (alkaline)
Drying time (In general, the drying time depends on the type and quantity of application as well as the on-site environmental conditions.):
Material consumption depending on the absorbency of the substrate (exact values can be determined by appropriate preliminary tests): approx. 60 - 100 ml/m2
Yield per 30 kg container: approx. 150 - 300 m2
Downloads
