Lithodecor Litho-Stone

Lithodecor Fassaden GmbH

Description

Litho-Stone offers a wide range of options for the design of your high-quality natural stone façade with numerous types of natural stone, formats and mouldings. Even large panels up to 7.7 m² are hung into the aluminium substructure with invisible fastenings.

The slabs consist of a 5 to 10 millimeter thick natural stone element as a top layer on a lightweight concrete beam with a maximum thickness of 19 millimeters and are up to 60 percent lighter than solid natural stone slabs. Overhead mounting is also possible with invisible fastenings.

More Over

Modern architectural facades contain plastic structures. We can easily implement such designs with our architectural elements in natural stone: moulded parts in floor-to-ceiling design up to a stone length of 3.50 m.

We make it possible to produce moulded parts that appear to be cast from a single mould and have a significantly reduced dead weight. In this way, monolithic-looking, three-dimensional molded parts such as corners, angles or U-shells can be produced. To do this, the composite panels are first mitred and glued together without a visible joint. Monolithic appearance as if cast from a single mold.

Reveal elements
Parapet cladding
Lintel slabs
Column cladding
3D facades
Architectural elements
Individual design / type of natural stone / Surface
Modular construction

Suspended natural stone ceilings

Another advantage of the Litho-Stone VHF system is the overhead application of the system. While classic, solid natural stone solutions in the ceiling area very quickly reach constructive and economic limits due to their high dead weight and complex fastenings, with Litho-Stone you can easily solve suspended ceilings with static safety and comparatively cost-effective .

Technical Information

System: Rear-ventilated façade system with natural stone slabs on lightweight concrete beams
Properties: Compensation of unevenness thanks to flexible substructure, weather- and frost-resistant
Fastening: Invisible fastening on an aluminium substructure
Surfaces/appearance: On request and request of the customer
Element thickness: 25 to 34 mm (+/- 1 mm) depending on the thickness of the stone
Formats:

Façade application up to 7.7 m² slab size, depending on the rough stone format, maximum dimension 1800 x 4300 mm,

overhead application up to 5.26 m² slab size, depending on the rough stone format, maximum dimension 1300 x 4050 mm

Weight: 46 to 72 kg / m² depending on the design and stone thickness
Approval: Z – 10.3-817
Thermal insulation: Mineral wool insulation (WLG 032 and 035)
Fire behaviour: Non-combustible Building material class A2-s1 d0 according to DIN EN 13501 and flame retardant Building material class B1 according to DIN 4102-1
Impact resistance: E5 – classification possible, DIN 14019, highest resistance to mechanical influences.
Tolerances: Flatness: +/- 3-4 mm/m, Width/Length: +/- 1 mm, Reveal Depth: +/- 1.5 mm, Angular Deviation of Angle Joint: +/- 0.5 °

Downloads