Lithodecor Litho-Ceramics

Lithodecor Fassaden GmbH

Description

Litho-Ceramics offers a wide range of design and surface variants for the design of high-quality ceramic facades. The largest panel formats and floor-to-ceiling moulded parts are hung into the aluminium substructure without visible fastening.

The slabs consist of a 6-millimetre-thick surface course, which is glued over the entire surface on a lightweight concrete beam with a maximum thickness of 19 millimetres. These are highly resistant to mechanical damage.

More Over

The I-Catcher!

Modern architectural facades contain plastic structures. We can easily implement such designs with our ceramic elements: moulded parts in floor-to-ceiling design up to a length of 3.50 m.

The special material properties of the ceramic composite panel make it possible to produce moulded parts that appear to be cast from a single mould and have a significantly reduced dead weight. In this way, monolithic-looking, three-dimensional molded parts such as corners, angles or U-shells can be produced.

Long live diversity!

The variety of surfaces and colours for the Litho-Ceramics VHF system gives you enormous design variance and freedom. Some of the surfaces look like natural stone, others like concrete. You can even simulate aesthetically rusted metal surfaces with litho-ceramics in a deceptively realistic way.

Technical Information

System: Rear-ventilated façade system with ceramic panels on lightweight concrete beams.

Features: Compensation of unevenness due to flexible substructure, weather-resistant, frost-resistant.

Fastening: Invisible fastening on aluminium substructure.

Surfaces/Appearance: Extensive collection of design surfaces.

Element thickness: 25 to 33 mm (+/- 1 mm) depending on the ceramic thickness

Formats:

Façade application 3200 x 1500 or 3600 x 1200 mm, depending on the surface structure

overhead application 3200 x 1300 or 3600 x 1200 mm, depending on the surface structure

Weight: 37 or 45 kg / m² depending on the version with 6 mm ceramic

Approval: Z-10.3.818

Thermal insulation: Mineral wool insulation (WLG 032 and 035).

Reaction to fire: Non-combustible Building material class A2-s1 d0 according to DIN EN 13501 and Flame retardant Building material class B1 according to DIN 4102-1

Impact resistance: E5 – classification expected, DIN 14019, highest resistance to mechanical influences

Tolerances: Flatness: +/- 3-4 mm / m, Width / Length: +/- 1 mm, Reveal depth: +/- 1.5 mm, Angular deviation of the angle connection: +/- 0.5 °

Downloads