NEODUR Rapid Grouting Mortar SVM 03 / SVM 04

KORODUR Westphal Hartbeton GmbH & Co. KG

Description

mineral, hydraulically setting, highly flowable quick-grouting mortars

for grouting work and installations of all kinds

NEODUR SVM 03 and SVM 4 quick-grouting mortars are ready-to-use, early-high-strength quick-grouting mortars for grouting work and installations of all kinds, based on high-quality KORODUR aggregates.

NEODUR SVM 03: Grain size 0 - 0.5 mm
NEODUR SVM 4: Grain size 0 - 3 mm

More Over

Application

For fast and force-fit grouting work, e.g. for anchor and assembly holes, for casting machines, turbines, crane runway rails, steel and concrete supports, railing posts, constructions for signalling equipment, high-bay supports, pipe penetrations and heavy-duty gutters for traffic areas. NEODUR SVM 4 is particularly suitable for casting catenary masts for the electrification of railway lines.

Properties

: fast-setting
highly flowing,
fast initial strengths (can be loaded at short notice),
good adhesion to concrete and steel
impermeable to water,
chloride-free,
easy to mix
for indoor and outdoor

processing

Substrate: For a force-fit bond, the substrate must be crack-free, even, free of loose parts, dust, cement sludge, oils and greases. Pre-wet the substrate thoroughly, avoid puddling.

Processing: Mix NEODUR quick-grouting mortar as a complete container with the prescribed amount of water for approx. 1 - 2 minutes with a suitable forced mixer or with agitator (approx. 400 rpm). The grouting must be free of cavities and without interruption of work. Care must be taken to ventilate.

Aftertreatment

Different temperatures influence the solidification or hardening process. NEODUR quick-grouting mortars must be protected from drying out too quickly in accordance with DIN EN 13670 / DIN 1045-3.

Delivery form

25 kg paper special packaging

Storage

Store in a dry place like cement. Shelf life approx. 3 months.

Technical Information

Quality:

NEODUR SVM 03: C35/45
NEODUR SVM 4: C50/60

Grit:

NEODUR SVM 03: 0 - 0.5 mm
NEODUR SVM 4: 0 - 3 mm

Compressive strength [N/mm2]

NEODUR SVM 03:

after 1 hour: ≥ 8 N/mm2
after 24 hours: ≥ 23 N/mm2
after 28 days: ≥ 55 N/mm2

NEODUR SVM 4:

after 1 hour: ≥ 7 N/mm2
after 24 hours: ≥ 15 N/mm2
after 28 days: ≥ 40 N/mm2

Pour height/width:

NEODUR SVM 03: approx. 5 - 30 mm
NEODUR SVM 4: approx. 10 - 50 mm

Water addition:

NEODUR SVM 03: approx. 5.3 l/25 kg
NEODUR SVM 4: approx. 3.0 l/25 kg

Coverage:

all qualities: approx. 12 - 13 l/25 kg

Temperature (processing, ambient and substrate temperature):

all qualities: ≥ 5 °C

Downloads