blaugelb Multifunctional Ribbon Trio SDL 600

Due to its special properties, it is used to seal the three levels of connection and movement joints in windows and doors. The year-round drying of the joint according to EnEV and DIN 4108-3 is ensured and confirmed by the ift Rosenheim Institute. The long-term functionality was proven in a component test according to the ift guideline MO-01 / 1 : 2007-01. Installation can be carried out regardless of the weather. Since sealing the joint with the blaugelb multifunctional tape TrioSDL600 requires only one step, it offers considerable savings potential in terms of the cost and time required for waterproofing.

Glue and press the blaugelb multifunctional tape TrioSDL600 to the window profile using factory self-adhesive. Always blunt the corners and ends of the bands. Add a band reserve of approx. 15 mm. The grey-impregnated hinge side must be installed on the room side.

The self-adhesive has excellent adhesion to commercially available window profiles. The pre-compressed blaugelb multifunctional belt TrioSDL600 has a high resilience and expands automatically to the specified joint widths. With only a few hinge dimensions, different joint tolerances can be compensated for. Component movements are reliably absorbed and breaks in the joint are avoided. The blaugelb multifunctional tape TrioSDL600  can be plastered over and painted over and can thus be installed completely concealed. It is suitable for renovation as well as for new construction.

Product advantages:

• only 1 product and only 1 assembly step for the sealing of all 3 levels
• over 600 Pa Driving rainproof and vapour diffusion-permeable sealing for the outer level
• Sound and heat insulation in the middle level
• airtight and vapour retardant in the inner level according to BG R
• component testing according to ift guideline MO-01 / 1 : 2007-01
• BG 1 – tested according to DIN 18542
moisture
• and temperature resistant
• Easy and fast processing with a self-adhesive strip, saves time and money
• High adhesive strength of self-adhesive on standard window and door profiles*
• flexible, absorbs component movements High
• resilience, different joint widths are covered with a few tape dimensions
• Installation possible regardless of the weather
Building
• material class B1 – flame retardant (according to DIN 4102)
• Joint sealing according to EnEV, DIN 18355
• Joint sealing in accordance with the guidelines for the planning and execution of the installation of windows and front doors for new buildings and renovations
• manufactured under the quality system according to ISO 9001/EN 29001
• Low-emission tested according to EMICODE EC1 Plus

 *Carry out suitable preliminary tests

Technical data:

• Material: special, impregnated PU foam
• Building material class according to DIN 4102: B1 (flame retardant)
• Stress group according to DIN 18542: BG 1 and BG R
• Driving rain tightness according to DIN EN 1027: ≥ 600 Pa
• Joint permeability coefficient according to DIN EN 12114: a ≤ 0.1 m³ / [h*m*(daPa)n]
• Thermal conductivity according to DIN EN 12667: ƛ = 0.048 W/m*K
• Joint sound insulation: up to 59 dB (joint plastered on both sides)
• Thermal shock resistance according to DIN 18542: from -30°C to +80°C
• Compatibility with adjacent building materials according to DIN 18542: meets
• light and weather resistance according to DIN 18542: meets
• water vapour diffusion resistance according to DIN EN ISO 12572: μ ≤ 100
• sd value: vapour diffusion permeable
• U-value Window construction depth 60 / 70 / 80 / 90 mm according to DIN 4108-3: U = 0.8 / 0.7 / 0.7 / 0.6 W/(m²*K)
• Processing temperature: +5°C to +30°C
• Dimensional tolerance according to DIN 7715 T5 P3: fulfilled
• Storage temperature: at +1°C to +20°C
• Shelf life: 12 months, with dry storage in the unopened original container, upright
• Colour: anthracite, grey impregnated inside

☛ test certificate