blue-yellow mounting bracket

blaugelb - a brand of the Meesenburg Group

Description

The fastening of window elements is subject to high requirements with regard to the power transmission from wind loads, dead loads of the building elements, payloads and special loads. The connections of the fasteners and fasteners to be used must be statically dimensionable with regard to the object-specific requirements. See "RAL LZM chap. 5" (as of 03/2014). This requirement in accordance with the recognised state of the art is also subject to blaugelb mounting brackets in their diverse application.

More Over

Areas of application:

For internal, force-transmitting
fastening For external, force-transmitting fastening
Transmission of vertical and horizontal forces in window plane
Transmission of horizontal forces perpendicular to the window plane
Safe element fastening in new buildings and renovations

Note: Coupled profiles (e.g. upper/lower frame extensions) have a static effect like a joint. To counteract this, a load-bearing "abutment" must be created during assembly. See also requirements from "RAL LzM chap. 5" , installation specifications of window profile systems and roller shutter suppliers.

Tested properties:

ETB guideline: 1985 and DIN 4103-1: 2015 in ensemble
- blue-yellow plinth insulation profiles IHP/EPS
- blue-yellow plinth insulation profiles PVC/EPS
- blue-yellow plinth insulation profiles EPS
- blue-yellow mounting bracket
- blue-yellow fixed frame screws FK-T30
- floor-to-ceiling elements installation situation - frame wood, PVC, Al
- floor-to-ceiling elements Installation situation – threshold systems
- floor-to-ceiling elements Installation situation – lift-and-slide door systems
Horizontal load application
Static design resistances Suction/pressure

Product advantages:

Different hole diameters to accommodate screws/dowel systems in different anchoring bases / solid wall formers
High flexibility of the fastening points in the building element/building structure due to offset hole pattern
Continuous fitting of the hole pattern always enables compliance with the required edge distances of the screw fasteners in the wall former
Slotted holes for adjusting the fastener in two planes and for accommodating building tolerances
High corrosion protection
Can be statically dimensioned to verify the fastening by means of extensive test series
Various leg lengths of the brackets offer a wide range of applications
Brackets can be used on both sides – adapted to the respective construction situation
Factory profiling of the brackets allows high force absorption and deformation resistances
Convenient adjustment and secure fastening
Secure fastening even with high element weights
Tested for the fastening of fall protection elements
Offset hole pattern in 8.0 mm and 10.5 mm respectively, this ensures that the screw connection does not hit the steel reinforcement
Slotted holes for fixation and alignment
Slotted holes for fixation and alignment in vertical and horizontal directions
Easy to model the waterproofing foils

Technical Information

Material: cold-rolled DC01-A-m

Surface: electro-galvanized

Material thickness: 2 mm

Mounting bracket Total thickness: 10.8 mm

Lengths: 40, 80, 156.5, 200, 240 mm

Packaging unit: 25, 40, 50 or 100 pieces

Downloads