illbruck SP925 waterproofing coating

• Driving rain tightness 600 Pa
• Airtightness a < 0.1 m³/[h ·m· (daPa)n]
• Can be sprayed and painted
• 50% 3D formability and permanent movement absorption
• Can be used on damp substrates
• Good compatibility with common construction products

Certificates, tests and verifications

• EC1PLUS very low emissions
• DGNB Registration code: CSUN43
• Tested according to all parts of the ift guideline MO-01/1
• Water-resistant to 2.5 bar (equivalent to 2500 Pa)
• 10-year additional warranty (i3)

• Material: 1-component, elastic and low-viscosity waterproofing membrane on the modified SMP polymer base
• Material thickness: ≥ 3 mm wet film thickness
• Temperature resistance: - 40°C to + 80°C
• Building material class: Class E (DIN EN 13501-1)
• DGNB: Registration code: CH2SDG; Criteria Matrix No.44 – Quality Level 4, SVHC < 0.1%; is manufactured without halogenated flame retardants, solvent-free and not using (H)CFC/CKW Very
• low emission: EC1PLUS (GEV)
• Airtightness: a < 0.1 m³/[h m (daPa)2/3] (DIN 18 542)
• Driving rain tightness: 600 Pa
• Watertightness: W1, 2000 Pa (DIN EN 13859)
• UV resistance: Permanent
• Water vapour diffusion: μ = 1,500 (DIN EN ISO 12572)
• Density: 1.3 g/cm³ (DIN 52451-A)
• Skin formation time: ± 10 min. (at 23°C/50% RH)
• Curing: approx. 3 mm / 1st day (at 23°C/50% RH)
• Colour: Anthracite grey RAL 7016
• Form of delivery: Cartridges and tubular bags

of application

• rain-proof sealing of window and façade connections (external sealing)
• Airtight sealing of window and façade connections (interior sealing)
• Driving rain and airtight sealing of window and façade fasteners (also across sealing levels)

SP925 is part of our i3 waterproofing system and can therefore be combined with many other waterproofing products. For waterproofing with our i3 system, we offer a 10-year functional warranty (see data sheet).

Design (for more detailed information, please refer to the data sheet)

• The planning of the joint dimension (movements must be taken into account)
• Do not use SP925 on polyethylene, polypropylene, silicone, butyl rubber, neoprene, EPDM, bitumen or tar-containing surfaces.
• Above all, the adhesive surfaces must be free of oil, grease, dust or other anti-adhesive components. Check compatibility with adjacent building materials.
• As a rule, you spread the waterproofing coating with the brush on both sides of the joint at least 10 mm on mineral substrates, so that a film of about 3 mm thickness is created.
• Processing with compressed air guns: optimal 6 bar, max. 8 bar.
• The time until SP925 is fully cured depends on humidity and temperature.

Details / Tender Texts

can find a lot of principle details for download, technical articles and installation tips on our online platform for planners:

☛ Expert Area

We have also provided many tender texts for you to download:

☛ Would

you like to configure your window seal yourself depending on the wall construction?

☛ Waterproofing Planner

Advice

Is there anything missing? Do you have any questions? Our property consultants will be happy to support you with your planning https://www.illbruck.com/de_DE/kontakt/fuer-planer-architekten/ Our technical hotline +49 2203 57550 600 is also available to you.