illbruck FA101 Window and Connection Joint Silicone

• Driving rain and airtight
• Permanent UV resistance
• Abrasion-resistant and streak-free
• Paint compatible
• 25% permissible total deformation
• Good compatibility with common construction products

Certificates, tests and verifications

• EC1 very low emission
• DGNB Registration code: GU2T5T
• RAL quality mark
• Tested according to ift guideline MO-01/1
• 10-year additional warranty (i3 system)
• CE mark (Download Declaration of Performance: https://www.illbruck.de/fa101)

• Material: 1-component silicone sealant, neutral-curing, alkoxy-based
• sealant class: TYPE F-EXT-INT-CC-25LM (DIN EN 15651-1); Type XS1 (DIN EN 15651-3)
• Building material class: B2 (DIN 4102-1)
• Processing temperature: + 5°C to + 40°C
• Temperature resistance: - 60°C to + 180°C
• DGNB: Registration code: GU2T5T; Criteria Matrix No.13 – Quality Level 4; VOC < 1%; halogenated propellants < 0.1%; Chlorinated paraffins < 0.1%
• Very low emission: EC1 (GEV)
• UV resistance: Permanently
• permissible total deformation: 25%
• Volume change: approx. 3% (ISO 10563)
• Curing speed: approx. 2.5 mm/1st day (at 23°C, 50% relative humidity)
• Corrosiveness: Non-corrosive
•  
• Colours:  neutral transparent, pure white, cream white, transparent grey, concrete grey, grey, light grey, silver grey, dark brown, medium brown, ochre brown, pine brown, chocolate brown, dark oak, light oak, black

Area

• of application Interior and exterior sealing in the area of the building envelope (window and exterior door connections, façade)
• Wet glazing in wooden windows
• Interior fittings except sanitary

10 years warranty

FA101 is part of our i3 waterproofing system and can therefore be combined with many other waterproofing products. For waterproofing with our i3 system, we offer a 10-year functional warranty (see data sheet).

Design (more detailed information can be found in the data sheet)

• The adhesive surfaces must be clean, i.e. dust-free, grease-free, load-bearing and air-dry.
• Check compatibility with the building materials used (see data sheet).
• Connection joints are to be backfilled to the correct joint depth with closed-cell illbruck PR102 PE round cord. In the case of joints with a rigid joint base, differently shaped backfill materials are permitted in exceptional cases (e.g. elastocell tape or PE release films)
• Priming of the adhesive surfaces (e.g. illbruck AT101 primer on porous, mineral substrates)
• Masking of the joint edges with a suitable adhesive tape is recommended.
• Insert FA101 evenly into the joint without air bubbles and smooth the surface within the skin formation time with AA300 Smoothing Agent Concentrate or AA301 Smoothing Agent Spray.
• Contamination by smoothing agents must be avoided or washed off immediately with water.
• Then remove used masking tape immediately.

Details / Tender Texts

can find a lot of principle details for download, technical articles and installation tips on our online platform for planners:

☛ Expert Area

We have also provided many tender texts for you to download:

☛ Would

you like to configure your window seal yourself depending on the wall construction?

☛ Waterproofing Planner

Advice

Is there anything missing? Do you have any questions? Our property consultants will be happy to support you with your planning https://www.illbruck.com/de_DE/kontakt/fuer-planer-architekten/ Our technical hotline +49 2203 57550 600 is also available to you.