illbruck ME410 Window Butyl Tape

• Airtight
• UV resistance: 12 months
• Very good sound insulation properties
• Very high_{S D} value
• Can be plastered over

Certificates, tests and verifications

• DGNB Registration code: 3AC8KZ
• 10 years additional warranty (i3)

• Material: Self-adhesive plasto-elastic butyl rubber compound, laminated on one side with plastic fleece and equipped with additional fastening strip.
• Material thickness: 1.5 mm
• Building material class: Class E (normally flammable / DIN EN 13501-1)                                 
• Temperature resistance: - 40°C to + 80°C
• DGNB: Registration code: 3AC8KZ; Criteria Matrix No.44 – Quality Level 4, SVHC < 0.1%; is manufactured without halogenated flame retardants, solvent-free and not using (H)CFCS/CKW
• Airtightness: a < 0.1 m³/[h m (daPa)2/3] (DIN 18 542)
• UV resistance: 12 months
• Water vapour diffusion: μ=approx. 800,000 (DIN EN ISO12572) / S_D value approx. 1200 m
• Sound insulation: Up to 54 dB

• Airtight sealing of window and façade connections (interior sealing)
• Connections for high requirements for water vapour diffusion tightness (S_D value approx. 1200 m)
• Window sealing for high sound insulation requirements (up to 54 dB)

10-year warranty

ME410 is part of our i3 waterproofing system and can therefore be combined with many other waterproofing products. For waterproofing with our i3 system, we offer a 10-year functional warranty (see data sheet).

Design (more detailed information can be found in the data sheet)

• The adhesive surfaces must be dry and free of oil, grease, dust or other anti-adhesive components
On
• highly porous substrates (concrete, aerated concrete, plaster, etc.) as well as butyl tape overlaps, we recommend a primer with ME901 Butyl & Bitumen Primer/ME902 Butyl & Bitumen Spray Primer or the solvent-free ME904 Butyl & Bitumen Primer Eco
• Due to the high basis weight of the belt, the joints to be bridged must not exceed 1/4 of the width. This is especially important to observe horizontally above the window and at the corners.
• Roll carefully with a pressure roller.
• In principle, the foil must be installed tension-free (but not free-hanging).
• The foil can be plastered over with commercially available mortars

Details / Tender Texts

can find a large number of principle details for download, technical articles and installation tips on our online platform for planners:

☛ Expert Area

We have also provided many tender texts for you to download:

☛ Would

you like to configure your window seal yourself depending on the wall construction?

☛ Waterproofing Planner

Advice

Is there anything missing? Do you have any questions? Our property consultants will be happy to support you with your planning https://www.illbruck.com/de_DE/kontakt/fuer-planer-architekten/ Our technical hotline +49 2203 57550 600 is also available to you.