blue-yellow foil interiorSL1050 Power Plus

The built-in membrane ensures the prescribed airtight separation from the indoor climate to the joint. The strong adhesion of the self-adhesive supports the function and provides increased safety: no warm and humid room air flows into the connection joint and thus condensation is avoided – the dreaded mould formation is prevented.

The blaugelb film InnenSL¹⁰⁵⁰ Power Plus has a fully adhesive side and also a self-adhesive strip on the fleece-laminated side for mounting on the frame. This allows it to be glued on one or both sides.

In combination with the blue-yellow exterior film SL1050 Power One, the result is the perfect sealing of the joint for inside and outside.

Product advantages:

• airtight and vapour-retardant sealing for the inner level in accordance with DIN 18355
• with a fixed sd value approx. 30 m
• brilliantly high adhesive strength on standard construction substrates and window and door profiles* can
• be used on one and both sides
without additional film adhesive on one side and on one side adhesive over
• the entire surface
• self-adhesive strips on the fleece side for (pre-) installation on the frame
• can be plastered, glued over and painted, concealed installation
• 6 months UV-resistant
• driving rain-proof over 1,050 Pa
• water-impermeable
• flexible and elastic, compensates for joint movements moisture
-
• and temperature-resistant
• easy processing with perforated masking paper
joint
• sealant conforms to the guidelines for professional installation and GEG
• EMICODE EC1 Plus certified
• manufactured under the quality system according to ISO 9001/EN 29001

*Carry out suitable preliminary tests

Technical data:

Material: special plastic film with fleece lamination, adhesive on one and both sides

Building material class DIN 13501: class E

adhesive: high-performance special adhesive

sd value DIN EN ISO 12572: sd value approx. 30 m

joint passage coefficient DIN EN 12114: a < 0.1 m3/[h * m * (daPa)2/3], no measurable air passage

Driving rain tightness DIN EN 1027: ≥ 1,050 Pa

Waterproofness: 2,000 Pa

UV stability: approx. 6 months

Temperature resistance: from approx. -40°C to +90°C

Ambient temperature during processing: -5°C to +45°C if the film is

tempered at storage temperatureCompatibility with adjacent building materials: meets

flexibility at -23°C: no breakage, no cracks

Dimensional tolerance DIN 7715 T5 P3: meets

storage temperature: at +5°C to +20°C

Shelf life: 12 months, with dry storage in the unopened original container

Colour: white

☛ test certificate "EMICODE"