blaugelb Multifunctional Ribbon Trio SDL 750

The abbreviation Trio SDL⁷⁵⁰ stands for its properties

• Driving rain-proof over 750 Pa and weather-resistant on the outside
• Insulation of sound and heat in the functional level
• Airtight and vapour-retardant on the room side

Extreme weather phenomena and stricter building standards with stricter requirements for energy saving place increased demands on window sealing, both from the outside and from the inside. The nearly zero-energy building standard laid down in the Building Energy Act (GEG) requires the highest level of airtightness and insulation in the connection joint.

• Air-stop technology LST – 100% more airtight than the standard required
• Effective for CO₂ reduction
• For more climate protection
• For lower heating costs
• For healthy living without mould
• Suitable for passive houses, nearly zero-energy buildings and zero-energy houses
• Suitable for meeting the required values in the blower door test

Sealing the joint with the blaugelb multifunctional tape Trio SDL⁷⁵⁰ requires only one step and saves the cost and time required for waterproofing. The pre-compressed blaugelb multifunctional belt Trio SDL⁷⁵⁰ has a strong resilience and expands automatically. This allows an extended joint width range to be sealed with one tape size. Component movements are reliably absorbed and breaks in the joint are avoided.

The blaugelb multifunctional tape Trio SDL⁷⁵⁰ can be plastered, glued over and painted over and can thus be installed completely concealed. It is suitable for renovation as well as for new construction.

Product advantages:

• absolutely airtight, a-value = 0.00: requirement of DIN 18542:2020-04 exceeds Safe
• separation of indoor and outdoor climate in the joint due to LST membrane
driving
• rainproof ≥ 750 Pa – 25% more protection compared to the standard requirement
• with moisture protection, tested according to the new DIN 18542:2020-04 MF 1
• The connection area remains dry - thus improved insulation performance
• suitable for passive house and zero-energy house standard
• corresponds to the principle of "tighter inside than outside"
• the light grey inside is ideal for use with modern exposed concrete walls
• sealing a larger joint width with only one tape
• optimised roll length, thus less tape joints and less waste
• moisture and temperature resistant
simple
• and fast processing with self-adhesive
• High adhesive strength of the self-adhesive on the standard window and door profiles*
• flexible - absorbs component movements Installation
• possible regardless of the weather
Building
• material class B1 - flame retardant (according to DIN 4102)
• Joint sealing according to GEG, DIN 18355, DIN 4108
• manufactured under the quality system according to ISO 9001/EN 29001
• Low pollutant tested according to EMICODE EC1 Plus

*Carry out suitable preliminary tests

Technical data:

Material: special, impregnated PUR flexible foam with air-stop technology and 3-level structure

Building material class DIN 4102: B1 (flame retardant)

Stress group DIN 18542:2020-04: MF 1

Driving rain tightness DIN EN 1027: ≥ 750 Pa

Joint permeability coefficient DIN EN 1026: a = 0.00 m³ / [h*m*(daPa)n]

Thermal conductivity nominal value DIN EN 12667 | DIN 18542:2020-04: ƛD,10 = 0.052 W/m*K

Joint sound insulation: up to 58 dB

Thermal shock resistance DIN 18542:2020-04: from -30°C to +80°C

Compatibility with adjacent building materials DIN 18542:2020-04: meets

light and weather resistance DIN 18542:2020-04: meets

sd value: slope from the inside to the outside given

U-value window construction depth 60 / 70 / 80 mm DIN 4108-3: U = 0.8 / 0.7 / 0.6 W/(m²*K)

Processing temperature: +5°C to +30°C

Dimensional tolerance DIN 7715 T5 P3: fulfilled

Storage temperature: at +1°C to +20°C

Shelf life: 12 months, with dry storage in the unopened original container, upright

Colour: anthracite (outside), grey (inside)

☛ test certificate