illbruck TP654 illmod TRIO 1050

• Suitable for joint widths of up to 30 mm
• Highest stress group (MF1 according to DIN 18542)
• Driving rain tightness up to 1050 Pa (generally over 600 Pa)
• Airtightness a < 0.05 m3/[h ·m· (daPa)n]
• Meets the airtightness classification for passive houses
• Permanent UV resistance up to 25mm joint width
Open
• to vapour diffusion to the outside (supports drying of the joint)
• Good compatibility with common building products
• Easy to assemble without confusion, as there is no predetermined inside and outside

Certificates

• EC1PLUS very low emissions
• 10-year additional warranty (i3)
• Very good sound insulation (up to 60 dB)

• Material: 3-layer PUR foam structure with integrated moisture-variable membrane; Foam structure consisting of impregnated foam and fine-cell contact surface foam
• Building material class: B1 – flame retardant (DIN 4102)
• Thermal conductivity: λ = 0.045 W/m/K (DIN 52612)
• Temperature resistance: - 30°C to + 80°C
• Very low emission: EC1PLUS (GEV)
• Stress group: MF1 according to DIN 18542 Due to much higher airtightness values, also suitable for passive houses.
• Airtightness: a < 0.5 m³/[h m (daPa)2/3] (DIN 18 542)
• Driving rain tightness: 1050 Pa
• UV resistance: Permanent up to 25mm joint width (for applications 6-15 and 10-25 mm)
• Water vapour diffusion: vapour diffusion-permeable, S_d < 0.5 m (DIN 4108 T3)
• Sound insulation: Up to 60 dB (EN ISO 717-1)
• Colour: Anthracite + grey

• Three-level sealing of window and exterior door connections

10-year warranty

TP654 is part of our i3 sealing system and can therefore be combined with many other sealing products. For waterproofing with our i3 system, we offer a 10-year functional warranty (see data sheet).

Execution (more detailed information can be found in the data sheet)

• The planning of the joint dimension (materials and movements must be taken into account)
• In the case of unevenness or distortions in the reveal surface, a smooth line may have to be made in the sealing area of the tape.
• Select the appropriate band dimension from the table (datasheet).
• No predetermined inside and outside (due to moisture-variable membrane).
• At temperatures above 20°C and below 8°C, the rising behavior of the belt can accelerate or slow down, if necessary the belt must be stored accordingly.
• The tape must be laid at least 2 mm inwards from the front edge of the joint flank.
• The ends of the ribbon and the corners of the strip are bluntly pushed.

Details / Tender Texts

can find a lot of principle details for download, technical articles and installation tips on our online platform for planners:

☛ Expert Area

We have also provided many tender texts for you to download:

☛ Would

you like to configure your window seal yourself depending on the wall construction?

☛ Waterproofing Planner

Advice

Is there anything missing? Do you have any questions? Our property consultants will be happy to support you with your planning https://www.illbruck.com/de_DE/kontakt/fuer-planer-architekten/ Our technical hotline +49 2203 57550 600 is also available to you.