Teckentrup industrial sectional door "SLW 80"

Teckentrup GmbH & Co. KG

Description

The Teckentrup sectional door type SLW 80 with steel slat base and elegant aluminium frame construction is the economical alternative when robustness and generous incidence of light are equally required. Glass elements allow plenty of light into the hall and create a bright, pleasant working atmosphere.

The double glazing used as standard achieves optimum thermal insulation values. A custom-fit floor seal reduces possible heat loss and protects against penetrating rain, even with small uneven floors. There are suitable drives for all types of doors.

☛ B roschüre

More Over

Product features:

High load capacity with steel slat base
Elegant aluminium frame construction
Plenty of light for a better working atmosphere

Installation in:

Masonry
Concrete
Steel structure

☛ LV-Text

Technical Information

Performance characteristics (according to EN 13241-1):

Thermal insulation: EN 13241-1, Annex B EN 12428
U = 2.1 W/(m²K) (door* with triple drawer) * for a door area of 25 m²
Wind load: Classification according to EN 12424, test according to EN 12444
Class 3
Driving rain tightness: Classification according to EN 12425, test according to EN 12489
Class 0
Air permeability: Classification according to EN 12426, test according to EN 12427
Class 3
Reaction to fire: DIN EN 4102
Door leaf element Building material class B2 (normally flammable)
Sound insulation value according to ISO 140-3, Rating according to EN 717-1, Rw = 25 dB

Size range:

Construction standard dimensions: Width: 2000 - 8000 mm

Height: 1875 - 6000 mm

(other dimensions on request)

Door leaf:

Consisting of a SW 80 door section, galvanized steel sheets
Construction depth: 80 mm
Insulation: polyurethane foamed
Surface: Panels horizontally beaded on the outside, stucco-designed, or without beaded micro-profiled, always stucco-designed on the inside, standard colour similar to RAL 9002 Grey-white

glazing:

Continuous rooflight as an independent section of aluminium profiles in thermally separated construction
Surface anodized in E6/EV1, filled with 43 mm KS triple pane colorless as standard, retaining strips anodized aluminum E6/EV1 with gasket
Optional: 4-fold glazing, scratch-resistant surface, etc.

Drives:

shaft drive, chain drive, three-phase voltage 400 V, 3~Ph, 50 Hz, 60% ED, protection class IP 65, with emergency hand crank, TÜV tested
shaft drive with AC voltage 230 volts 1~Ph, 50 Hz, 60% ED, protection class IP 65, with emergency hand crank, TÜV tested, in combination with frequency converter control with soft start and soft stop
Direct drive as springless door without weight compensation, torsional voltage 400 volts 3~Ph, 50 Hz, 60% ED, protection class IP 65, with emergency hand crank, TÜV tested, safety gear integrated

Control:

For shaft and chain drives, pre-wired ready for plugging and with CEE plug. In the basic configuration, it is designed as a dead man's control. Function without closing edge protection, control voltage 24 V safety extra-low voltage, protection class IP 65, push button open-stop-close.
Impulse control (self-holding "closed") in conjunction with a closing edge protection
Radio remote control
Automatic inlet in combination with traffic lights
Oncoming traffic control

Special equipment:

Panels Fixed
panels with door in the same view
Stop profiles
Ventilation grilles
Special colours according to RAL

Downloads