Teckentrup industrial sectional door "SLW 40"

Teckentrup GmbH & Co. KG

Description

The Teckentrup sectional door type SLW 40 with steel slat base and elegant aluminium frame construction is the economical alternative when robustness and generous incidence of light are equally required. Glass elements allow plenty of light into the hall and create a bright, pleasant working atmosphere.

The double glazing used as standard achieves optimum thermal insulation values. A custom-fit floor seal reduces possible heat loss and protects against penetrating rain, even with small uneven floors. There are suitable drives for all types of doors.

Important: From now on, this door variant is also available in the beading, without beading, central beading and in the woodgrain, stucco, smooth and microprofiled finishes.

☛ B roschüre

More Over

Product features:

Robust thanks to steel slat base
Generous light area

Installation in:

Masonry
Concrete
Steel structure

☛ LV-Text

Technical Information

Performance characteristics (according to EN 13241-1):

Thermal insulation: EN 13241-1, Annex B EN 12428
U = 3.1 W/(m²K) (door* without wicket door with double pane)
U = 3.5 W/(m²K) (door* with wicket door with double pane)
Optional U = 2.4 W/(m²K) (door* with 5-chamber multi-wall panel)
Optional U = 2.9 W/(m²K) (door* with KS triple pane) * for a door area of 25 m²
wind load: classification according to EN 12424, Test according to EN 12444
class 2 (max. Pa) (without / with wicket door)
Driving rain tightness: Classification according to EN 12425, test according to EN 12489
class 2/3* (without wicket door)
Class 1/3* (with wicket door) * Only achievable with special floor connection profiles
permeability: Classification according to EN 12426, test according to EN 12427
class 3 (without / with wicket door)
Fire behaviour: DIN EN 4102
Door leaf element Building material class B2 (normally flammable)
Sound insulation value according to ISO 140-3, rating according to EN717-1, Rw = 23 dB

Size range:

Construction guideline dimensions: Width: 2000 - 8000 mm

Height: 1875 - 6000 mm

(other dimensions on request)

Door leaf:

Floor section:
Consisting of a SW 40 door section, galvanized steel sheets
Construction depth: 40 mm
Insulation: Polyurethane foamed
Surface: Panels horizontally corrugated on the outside, stucco-designed or micro-profiled or micro-profiled without beading, always stucco-designed on the inside

Glazing:

Continuous rooflight as independent sections made of aluminium profiles
Surface anodised in E6/EV1, filled with 20 mm KS double pane colourless as standard, retaining strips KS black with gasket
Maximum frame height: 750 mm
Standard 20 mm double lens
Optionally in scratch-resistant design
Other fillings possible on request (structural glass, ISO plate, expanded mesh, perforated plate)

Drives:

shaft drive, chain drive, torsional voltage 400 volts 3~Ph, 50 Hz, 60% ED, protection class IP 65, with emergency hand crank, TÜV tested
Shaft drive with AC voltage 230 Volt 1~Ph, 50 Hz, 60% ED, protection class IP 65, with emergency hand crank, TÜV tested, in combination with frequency converter control with soft start and soft stop
direct drive as springless gate without weight compensation, torsional voltage 400 Volt 3~Ph, 50 Hz, 60% ED, protection class IP 65, with emergency hand crank, TÜV tested, safety gear integrated

Control:

For shaft and chain drives, pre-wired ready for plugging and with CEE plug. Function without closing edge protection, control voltage 24 V safety extra-low voltage, protection class IP 65, push button open-stop-to
impulse control (self-holding "closed") in conjunction with a closing edge protection
Radio remote control
Automatic infeed in combination with traffic lights Oncoming
traffic control

Special equipment:

Screens
Fixed panels with door with the same view
door (side door N53 with upper panel)
Integrated wicket door
Stop profiles
Ventilation grilles
Special colours according to RAL

Downloads