Teckentrup industrial sectional door "SL 40"

Teckentrup GmbH & Co. KG

Description

The Teckentrup sectional door "Type SL 40" made of aluminium frame profile and glazing elements is extremely translucent and gives every hall an elegant look. The glazing shapes and grids can be individually designed. The large incidence of light ensures work-friendly conditions. Depending on your wishes, coloured infill panels can also be combined with glazing panels to match the profile.

With the various window elements and steel slats, each industrial door can be individually tailored to the requirements of the building users. With their filigree appearance, they also underline the aesthetics of the façade design. There are suitable drives for all types of doors.

☛ B roschüre

More Over

Product features:

Aluminium frame profile
Elegant appearance
Extremely translucent
Suitable drives for all door types

Installation in:

Masonry
Concrete
Steel structure

☛ LV-Text

Technical Information

Performance characteristics (according to EN 13241-1):

Thermal insulation: EN 13241-1, Annex B EN 12428
U = 3.3 W/(m²K)(Door* without wicket door with double pane**)
U = 3.7 W/(m²K)(Door* with wicket door with double pane**), optional: U = 2.6 W/(m²K)(Door* with 5-chamber multi-wall panel)
U = 3.1 W/(m²K) (Door* with KS triple pane) * Complete door with a door area of 25 m²
Wind load: Classification according to EN 12424, test according to EN 12444
class 2 (max. Pa) (without / with wicket door) ** Floor section with aluminium sandwich panel
Driving rain tightness: Classification according to EN 12425, test according to EN 12489
class 2/3* (without wicket door)
Class 1/3* (with wicket door) * Only accessible with special floor connection profiles
permeability: Classification according to EN 12426, test according to EN 12427
class 3 (without / with wicket door)
Reaction to fire: DIN EN 4102
Door leaf element Building material class B2 (normally flammable)

Size range:

(standard construction dimensions): Width: 2000 - 8000 mm

Height: 1875 - 6000 mm

(other dimensions on request)

Door leaf:

Frame construction made of aluminium profiles; Cold profile without thermal break: AL-MG-SI 0.5
surface anodized in E6/EV1, filled with 20 mm KS double pane colorless as standard, retaining strips KS black with gasket

Glazing:

20 mm plastic glazing as standard
Maximum section height: 750 mm
Optionally in scratch-resistant design
Other fillings possible on request (structural glass, ISO panel, expanded mesh, perforated sheet)

Drives:

shaft drive, chain drive, three-phase voltage 400 Volt 3~Ph, 50 Hz, 60% ED, protection class IP 65, with emergency hand crank, TÜV tested
Shaft drive with AC voltage 230 Volt 1~Ph, 50 Hz, 60% ED, protection class IP 65, with emergency hand crank, TÜV tested, in combination with frequency converter control with soft start and soft stop
Direct drive as springless door without weight compensation, torsional voltage 400 volts 3~Ph, 50 Hz, 60% ED, protection class IP 65, with emergency hand crank, TÜV tested, safety gear integrated

Control:

For shaft and chain drives, pre-wired ready for plugging and with CEE plug. In the basic configuration, it is designed as a dead man's control . Function without closing edge protection, control voltage 24 V safety extra-low voltage, protection class IP 65, push button open-stop-close
impulse control (self-holding "closed") in conjunction with a closing edge protection
Radio remote control
Automatic inlet in combination with traffic lights
Oncoming traffic control

Special equipment:

Screens
Fixed panels with door with the same view
Side doors with the same view (side door N53 with upper panel)
Integrated wicket doors
Hinged profiles
Ventilation grilles
Special colours according to RAL

Downloads