Teckentrup industrial sectional door "SW 40"

Teckentrup GmbH & Co. KG

Description

The SW 40 industrial sectional door is based on a double-walled, 40 mm thick door leaf construction. It is equipped with a special PU rigid foam core as standard. Take advantage of these advantages for the planning of e.g. logistics and production halls, farms, etc.

The SW 40 offers the highest level of safety and reliability, with modern shapes and colours harmoniously integrated into any individual hall architecture. And the right drive system is also available. For many construction projects, the focus is on an economical solution - the SW 40 is perfect for this.

Important: From now on, this door variant is also available in the beading, without beading, central beading and in the woodgrain, stucco, smooth and microprofiled finishes.

☛ B roschüre

More Over

Product features:

High-quality steel slats
40 mm thick, double-walled, PU-foamed
Modern high-tech look

Installation in:

Masonry
concrete
steel structure

☛ LV-Text

Technical Information

Performance characteristics (according to EN 13241-1)

Thermal insulation: EN 13241-1, Annex B EN 12428
U = 0.56 W/(m²K) (panel 40 mm)
U = 1.2 W/(m²K) (complete. Gate without wicket door)
U = 1.4 W/(m²K) (complete. Door with wicket door) with a door area of 25 m²
wind load: Classification according to EN 12424, test according to EN 12444
Class 2 (max. Pa) (without / with wicket door)
Class 3 (max. Pa) (without wicket door) (up to 6,500 mm door width optional)
Driving rain tightness: Classification according to EN 12425, test according to EN 12489
Class 2/3* (without wicket door)
Class 1/3* (with wicket door) * Only accessible with special floor connection profiles.
Air permeability: Classification according to EN 12426, test according to EN 12427
class 3 (without / with wicket door)
Fire behaviour: DIN EN 4102
Door leaf element building material class B2 (normally flammable)
Sound insulation level according to ISO 140-3, rating according to EN717-1 Rw = 24 dB

Size range:

(construction guideline dimensions): Width: 2000 - 8000 mm

Height: 1875 - 6000 mm

(other dimensions on request)

Door leaf:

Consisting of individual gate sections, galvanized steel sheets; Construction depth: 40 mm, Insulation: Polyurethane foamed
Surface: Panels horizontally corrugated on the outside, stucco-designed or micro-profiled or micro-profiled without beading, always stucco-designed on the inside

Glazing:

Continuous rooflight as an independent section of aluminium profiles; Cold profile without thermal break: AL-MG-SI 0.5
surface anodized in E6/EV1
Filled with 20 mm KS double disc colourless as standard, retaining strips KS black with gasket
Further fillings with 3-fold disc, 5-chamber multi-wall plate, etc.

Drives:

shaft drive, chain drive, three-phase voltage 400 V, 3~Ph, 50 Hz, 60% ED, protection class IP 65, with emergency hand crank, TÜV tested
shaft drive with AC voltage 230 volts 1~Ph, 50 Hz, 60% ED, protection class IP 65, with emergency hand crank, TÜV tested, in combination with frequency converter control with soft start and soft stop
Direct drive as springless door without weight compensation, torsional voltage 400 volts 3~Ph, 50 Hz, 60% ED, protection class IP 65, with emergency hand crank, TÜV tested, safety gear integrated

Control:

For shaft and chain drives, pre-wired ready for plugging and with CEE plug. Function without closing edge protection, control voltage 24 V safety extra-low voltage, protection class IP 65, push button open-stop-close.
Impulse control (self-holding "closed") in conjunction with a closing edge protection
Radio remote control
Automatic inlet in combination with traffic lights
Oncoming traffic control

Special equipment:

Screens Fixed
panels with gate in the same view
Side door (side door N53 with upper panel)
Integrated wicket door
Stop profiles
Ventilation grilles
Special colours according to RAL

Downloads