Georock 040 MV

Wedge-shaped rock wool insulation board with mineral fleece lamination on the top, which is manufactured at the factory with a standard 2% gradient.

Suitable for direct hot and cold bonding of the roof waterproofing.

CAD planning is used to create a laying plan with the desired drainage form, e.g. linear or point drainage (point drainage in combination with Keprock throat slope plates).

The insulation thickness required by GEG is achieved by combining it with basic insulation.

The manufacturer has not yet provided any further information.

• Application: DAA - external insulation of roofs or ceilings, insulation under sealing, DIN 4108-10
• Surface: mineral fleece     
• Fire behaviour: non-combustible, A1, EN 13501-1
• Smouldering behaviour: no tendency to continuous smouldering, EN 16733
• Melting point: Melting point of rock wool > 1000 °C, use for short periods up to 250°C, DIN 4102-17
• Nominal value of thermal conductivity: λᴅ 0.039 W/m∙K, EN 13162
• Design value of thermal conductivity: λʙ 0.040 W/m∙K, DIN 4108-4
• Water vapour diffusion resistance coefficient: μ = 1, EN 12086
• Compressive stress at 10% compression/compressive strength: CS(10\Y) / CS(Y), σ10 ≥ 70 kPa, EN 826
• Tensile strength perpendicular to the plate plane (tear-off strength): TR, σmt ≥ 15 kPa, EN 1607
• Point load: PL(5)  FP ≥ 800, N, EN 12430
• Thickness limit dimensions: T4, EN 823
• Dimensional stability: DS(70,90),   EN 1604
• Short-term water absorption (flat): WS, Wp ≤ 1.0 kg/m², EN 1609
• Designation code: MW-EN 13162-T4-DS(70,90)-CS(10)70-TR15-PL(5)800- WS-MU1