IndorTec® THERM-E (Floor Coverings)

Gutjahr Systemtechnik GmbH

Description

IndorTec® THERM-E is an extremely easy and quick to install electric panel heating system. Thanks to optimal flatness, the carrier mat is laid extremely quickly. The special geometry with 38% less cavity than alternative systems ensures high energy efficiency. The heating cables are also coated with fillers/tile adhesives without cavities. In addition, the mat geometry prevents kinking in the heating cable and, due to its open structure, enables quick filling with just "one wipe".

More Over

Advantages:

Surface heating, heavy-duty connection coupling and waterproofing for wet rooms in one product.
Fast heating of the base:

- because heating cables are completely covered by adhesive.

- because 38% less air cavity needs to be warmed up.

Uniform heating cable cross-section in every length and socketless connection technology guarantee maximum installation comfort and functional reliability.
Easy processing thanks to optimal flatness and precise engagement of the heating cables in the carrier mat.
Time savings because filled out "with one wipe".
Available as a complete set - All complete - heating mat, cable, thermostat and empty pipes/sockets

Technical Information

Application:

For heating/tempering floor coverings on unheated and heated substrates

Suitable substrates:

On cracked screeds
On wooden substrates and dry screeds
On cavity floors
On mixed substrates
On mastic asphalt screeds
On young, still too moist surfaces Cement screeds
On young, still too moist calcium sulphate screeds

Substrate requirement:

Substrates must be even, compression-resistant, load-bearing and deflection-free. To seal damp and wet rooms, the joints/connections must be reworked with sealing adhesive and sealing tapes

Coverings:

Ideal for large-format coverings made of ceramic/natural stone
In combination with fillers, it can also be used with multi-layer parquet, as well as with textile and elastic coverings
Rubbers such as those advertised by the rubber manufacturer for the respective area of application are suitable. The ZDB leaflet valid for Germany provides orientation
Covering materials that tend to bowl or bulge in one-sided contact with water are not suitable

Material:

Carrier mat: Specially shaped, rot-proof plastic film (PP). Underside with a factory-laminated fleece.

Downloads