Full-surface self-adhesive, water, air and diffusion-tight special waterproofing film with HOTMELT adhesive technology
For connection sealing of
façade elements
Windows Front
door connections
butt bonding
Anchor sealing
The range of applications for this product is enormous.The TEROSON FO 150 FOIL-TACK M+S is classically used in the field of curtain walls and guarantees a Vapour-diffusion-tight and airtight sealing of connection joints between the window element and the building against water, water vapour and draughts in the interior and the outer warm side of the component. It is also used to seal concrete joints in rear-ventilated, thermally insulated facades and as protection against condensation formation in the insulation of rear-ventilated facades.
More Over
Properties
Fully self-adhesive
Immediately waterproof, driving rain and airtight
No additional mechanical fastening required
Very strong diffusion-inhibiting
bituminous resistant
Can
be processed down to -5 °C
Asymmetrically split release film with finger lift
Highly tear-resistant special film with patented hotmelt technology
Particularly flexible, therefore easily adaptable to the substrate
Adhesion even to wet profiles*
EMICODE EC 1 Plus certified
Product declarations and manufacturer's declarations according to DGNB, LEED, BREEAM available
*Adhesion to wet, non-absorbent substrates such as metal, PVC and coated wooden frames.
Areas of application
Vapour diffusion-inhibiting sealing of connecting joints between the façade element and the building structure against water, water vapour and convection in the interior and the outer, warm side of the component
For
sealing concrete joints in rear-ventilated, thermally insulated facades
As protection against condensation formation in the insulation of rear-ventilated facades
As a waterproof sealing strip for all penetrations in pitched roofs (roof windows, ventilations, etc.)
Waterproofing of vertical and horizontal surfaces on the water-facing side of the component (positive side), both outside and inside
Waterproofing against soil moisture and non-pressing water for floor slabs and walls in contact with the ground in accordance with DIN 18533-1 (classes W1.1-E, W1.2-E) and DIN 18533-2:2017-07, Table 9
Waterproofing of earth-covered ceilings (class W3-E)
Sealing against capillary rising damp and splash water at the wall base (class W4-E)
Technical Information
Base: double laminated HDPE film & Henkel hotmelt technology
Colour: anthracite
Length (EN 1848-2): 20 / 30 m ± 0.1 %
width (EN 1848-2): 150-1000 mm ± 0.05 %
thickness (EN 1849-2): total - approx. 0.4 mm ± 10 % effect. 100μm ± 5 %
mass (EN 1849-2): approx. 0.4 kg/m² ± 0.03
straightness (EN 1842-2):
Passed Visible defects (EN 1842-2): passed
Processing temperature: -5 °C to +35 °C
Folding in the cold: (EN 495-5) > -30 °C
Maximum tensile strength / elongation (N/6mm): (EN 12311-2, method B) (EN 12311-1) ≥ 25 N ≥ 30 % ≥ 300 %
tear propagation resistance: (EN 12310-1) > 100 N (nail shaft)
Resistance to static load (EN 12730): ≤ 5 kg (Test Method B)
Resistance to Impact Load (EN 12691): ≤ 150 mm (Method A) ≤ 500 mm (Method B)
Shear Resistance of Joining Seams: (EN 12371-2) > 125 N/50 mm
Durability in Artificial Aging (EN 1296 & EN 1928): passed
Durability to Chemicals (DIN EN 847 & EN 1928):
passed water vapour permeability: (EN 1931 (m²sPa/kg)) 4.0 ± 30% / sd value = 102 m
Water resistance (EN 1928): 60 kPa (passed) 4 bar / 72 h ≙ 40 mWS
