Solarlux Megaline bi-folding glass door

Solarlux GmbH

Description

"PUSH TO THE LIMITS" - THE INNOVATION ON THE MARKET

The highly thermally insulated Megaline bi-folding door is used where particularly high or particularly wide sashes are required. With a maximum sash height of up to 4.50 m (or a sash width of up to 1.50 m), extreme sizes can be achieved without sacrificing smoothness and ease of use. The shape-optimised stainless steel running rail enables a guide-free carriage as well as the selection of various floor rails, including barrier-free floor rails in accordance with DIN 18040. Depending on the system height, several system belts are arranged on top of each other. This guarantees a high level of stability for the blades, which weigh up to 150 kg, even under increased wind loads. In the case of extreme static requirements, static profiles can also be used in the joint area of the sashes.

More Over

PROFILE SYSTEM

Modular, highly thermally insulated aluminium profile system with an installation depth of 84 mm
Running at the bottom, only low load absorption required in the lintel
angular profiling
width of 132.5 mm in the wing joint, depending on static requirements such as extreme wind loads , it is possible to supplement static profiles in the joint area of the wings . This results in a face width of 129 mm in the sash joint
One-piece multifunctional insulating bar "bionicTURTLE"® made of glass-fibre reinforced polyamide
Loose shear bond integrated in the insulating bar to compensate for thermal loads
Sashes are stably connected to mitres with internal, glued and pressed corner connectors
Controlled drainage
Running and guide rails are integrated into the system
Running and locking level separated
Floor rail (barrier-free and suitable for living spaces) available
Concealed cable routing can be integrated

SEALING SYSTEM

The sealing is carried out in two circumferential sealing levels, with constant gaps and constant sealing pressure between the sashes
Sealing levels are not interrupted
by the fittingsSheathed foam seals with the best sliding properties
Convection space interruption seal for increased U-values optionally available
Up to three sealing levels possible

Technical Information

DESIGN VARIANTS

Sash can be folded either inwards or outwards, can be executed to the left or right
Floor rail versions without stop in accordance with DIN 18040 "Barrier-free construction"
Floor rail without height offset possible as a minimum floor rail FITTINGS

No upstream running and guide rails
Fittings with one-hand operation
located in the profilesIn the event of increased wind loads, additional concealed "TwinX" wing centering can be integrated
System hinges also for high sash weights
Integrated system adjustment in the frame rebate, outside the sealing plane
The shape-optimized stainless steel track rail with tapered track roller enables a guide-free carriage
Ball-bearing stainless steel running technology: stainless steel track roller and stainless steel running surface low-noise and extremely Durable
Smooth-running and low-wear carriages with double-groove ball bearings and integrated lift-out protection
Sliding locking or optionally lockable sashes for controlled ventilation
High-quality Solarlux design handles in stainless steel
Lockable one-handed operation via special gearbox with 24 mm stroke
Through-wing sash with push-actuated multi-point locking and PZ executable
Secured hinge pins
Closure monitoring with reed contacts and concealed cable routing
Fastening of the frame profiles and floor rail via load-bearing mounting plates with centering grooves and sealing pads optional
Additional cover of the fastening screws in the frame rebate

ENVIRONMENT

Resource-saving production
Certified disposal according to DIN EN ISO 14001: 2009

OPERATION

Factory production control
Tested according to DIN EN 1090 Design class EXC1 and EXC2
Certified according to DIN EN ISO 9001

Downloads