illbruck FA870 Natural Stone Silicone

illbruck - a brand of Tremco CPG Germany GmbH

Description

FA870 is a special sealant that has been developed especially for the elastic sealing of construction joints in contact with natural stone. It can be used indoors and outdoors (e.g. for facades, floors, mirror joints or sanitary facilities).

If you are looking for a matt joint look, see FA880 Natural Stone Silicone Matt (https://www.illbruck.de/fa880).

FA870 is also suitable for use in very cold environments. It is permanently resistant to moisture and compatible with paint (according to DIN 52460).

No migration or migration of substances into adjacent joint flanks.

More Over

Driving rain and airtight
Permanently wet resistant
20% permissible total deformation
Elastic at low temperatures
Very good compatibility with natural stones, parquet floors
Glossy surface (for matt see illbruck FA880)
CE mark (Download Declaration of Performance: https://www.illbruck.de/fa870)

Technical Information

Material: 1-component silicone sealant, neutrally crosslinking, oxim-based
Building material class: E (DIN EN 13501-1)
Processing temperature: + 5°C to + 40°C
Temperature resistance: - 40°C to + 150°C
UV resistance: Permanently
permissible total deformation: 20%
Consistency/stability: 0 mm, dimensionally stable (DIN EN ISO 7390)
Resilience: approx. 90 % (DIN EN ISO 7389)
Tensile strength: approx. 0.6 N/mm² (DIN EN ISO 8339)
Volume loss: approx. 5% (DIN EN ISO 10563)
Skin formation time: approx. 15 min. (at 23°C, 50% relative humidity)
Curing speed: approx. 3.8 mm/1st day (at 23°C, 50% relative humidity)
Shore A hardness: Approx. 21 (DIN EN ISO 868)
Corrosiveness: Non-corrosive
Delivery form: Cartridge or tubular bag
Colours: Numerous colours available (see data sheet), others on request

Interior and exterior waterproofing in the area of the building envelope (window and exterior door connections, façade)
Interior fittings incl. Sanitary
mirror joints

Design (more detailed information can be found in the data sheet)

The adhesive surfaces must be clean, i.e. dust-free, grease-free, load-bearing and air-dry.
Connection joints are to be backfilled to the correct joint depth with closed-cell illbruck PR102 PE round cord. In exceptional cases, differently shaped backfill materials are permitted for joints with a rigid joint base (e.g. elastocell tape or PE release films).
If necessary, priming the adhesive surfaces (see data sheet - primer table)
Masking the joint edges with a suitable adhesive tape is recommended.
Insert FA870 evenly and without air bubbles into the joint and smooth the surface within the skin formation time, if necessary with AT300 smoothing agent.
Contamination by smoothing agents must be avoided or washed off immediately with water.
Remove used masking tape within the skin formation time.

Details / Tender Texts

You

can find a lot of principle details for download, technical articles and installation tips on our online platform for planners:

☛ Expert Area

We have also provided many tender texts for you to download:

☛ Would

you like to configure your window seal yourself depending on the wall construction?

☛ Waterproofing Planner

Advice

Is there anything missing? Do you have any questions? Our property consultants will be happy to support you with your planning https://www.illbruck.com/de_DE/kontakt/fuer-planer-architekten/ Our technical hotline +49 2203 57550 600 is also available to you.

Downloads