Teckentrup roller grille

Teckentrup GmbH & Co. KG

Description

Roller grilles are often used in shopping arcades to close off shops to protect the goods from theft, but still allow a view of the displays. Roller grilles are also used in the entrance area of multi-storey car parks and underground car parks. Here, too, it is a matter of burglary protection, especially at night, but also of ventilation and ventilation. Roller grilles consist of side rails and the flexible grid, which is wound onto a shaft at the lintel of the building.

The small lateral space requirement and the vertical guidance of the roller grilles are advantageous. Many gates are equipped with electric drives and operated via handheld transmitters, key switches, etc. In these cases, several light barriers ensure the necessary operational safety. Roller grilles from Teckentrup are designed for a long service life, high footfall and, above all, operating safety and effective burglary protection. They ensure a high air exchange, plenty of light and, above all, a good view. 

B<a href="https://www.teckentrup.biz/fileadmin/user_upload/teckentrup/Downloadcenter/01_Broschueren_DE/Broschuere_Rolltore.pdf" target="_blank">roschüre

More Over


Product features:
  • High air exchange Lots
  • of light and transparency
  • Reliable protection 
Installation in:

  • Masonry min. 120 mm
  • Concrete min. 150 mm
  • Steel
  • Aerated concrete only with steel edging min. 200
  • Wood min. 240 mm

LV text

Technical Information

Size range:
  • Construction standard dimensions: Width: up to 11500 mm

Height: up to 8000 mm

Gate armour:

Consisting of honeycombs connected to each other in a hinged form made of galvanised steel, stainless steel or aluminium

Surface:
  • Made of flat material: straight or curved honeycomb
  • Axial sliding pieces made of wear-resistant plastic (TG-A , TG-S, TG-E)
  • Made of flat ground material: straight honeycomb with cross bar (TG-X)
  • Stainless steel (TG-E)
  • press-blank aluminium
Drives:
  • tubular motor, 230 volt alternating current 50 Hz, protection class IP 54, short-term operation 20 % ED, max. 15 door operations per day
  • Separate safety gear
  • Emergency operation via awning rod
Controls:

Dead man's control 230 volts Control voltage via key switch "OPEN-CLOSED"

Special equipment:
  • Fixed side panel with built-in door
  • Swivel side panel with built-in door
  • Armoured cladding made of:
  • Galvanised sheet steel
  • natural aluminium
  • Other designs on request:
  • Slanted floor profiles, adapted to the floor
  • Side or roof mounts

Downloads