Teckentrup roller shutter "Thermoteck"

Teckentrup GmbH & Co. KG

Description

Our double-walled, insulated roller shutter Thermoteck is made of coated steel profiles. It is equipped with a camber seal and a primed winding shaft. The drive is a slip-on drive with 400 V rotational voltage. An emergency hand crank and an integrated safety gear are included as standard.

B<a href="https://www.teckentrup.biz/fileadmin/user_upload/teckentrup/Downloadcenter/01_Broschueren_DE/Broschuere_Rolltore.pdf" target="_blank">roschüre

More Over


Product features:
  • Galvanized and thermally insulated
  • Special profile
  • In lightweight steel construction
Installation in:

  • Masonry: min. 120 mm
  • Concrete: min. 150 mm
  • Steel
  • Aerated concrete: min. 200 mm (only with steel edging)
  • Wood: min. 240 mm

LV-Text

Technical Information

Performance characteristics (according to EN 13241-1):

Profiles made of galvanized steel double-walled:

  • Thermal insulation
  • U-value according to EN ISO 12567-1 (for door size = 4000 x 4000 mm)
  • U-value W/(m²*K) (complete door): 3.5 W/(m²*K)
  • Sound insulation value
  • RW (tested) 20 dB
  • Air permeability
  • Classification according to EN 12426 Class: 0
  • Wind load
  • Classification according to EN 12424 Class: 2
  • Driving rain tightness
  • Testing according to EN 12489
  • Classification according to EN 12425 Class: 0
Size range:
  • Construction guideline dimensions: Width: up to 18,000 mm

Height: up to 12,000 mm

  • (Other dimensions on request)
Gate armor:

Consisting of hinge-like interlocking profiles made of galvanized steel

Surface:
  • Profiles made of double-walled steel, pitch 95 mm Galvanized
  • steel or steel strip coated
Drives:
  • Slip-on drive with integrated safety gear or chain drive with separate safety gear and electr. Forced disconnection
  • three-phase voltage 400 V, 50 Hz, 60 % ED, protection class IP 54, with emergency hand crank, TÜV tested
  • Other special voltages, protection classes or emergency actuations on request
Control:
  • Gate leaf
  • Surface: galvanized
  • For plug-on and chain drives, pre-wired ready for plug-in and designed with CEE plug in the basic equipment and as a dead man's control , is easy to upgrade with:
  • Self-holding "CLOSED" in conjunction with a closing edge safety
  • Radio remote control
  • Automatic infeed (with traffic lights)
  • Accessories for controls:
  • Automatic inlet (with traffic lights), additional light barrier recommended
  • Traffic light control
  • Digital induction loop
  • Without closing edge protection:
  • In the basic version, control voltage 24 V safety extra-low voltage, protection class IP 65, "gate closed" in dead man's switch (continuous pressure), push buttons "open-stop-closed"
  • with closing edge protection:
  • control with self-monitoring closing edge protection, control voltage 24 V safety extra-low voltage, protection class IP 65, "gate closed" and "gate open" in self-holding with push buttons "open-stop-closed"
  • Fixed side panel with built-in door
  • Swivel side panel with built-in door
  • Armour cladding made of:
  • Galvanised sheet steel
  • natural
  • Aluminium Other designs on request:
  • Slanted floor profiles, adapted to the floor
  • Side or roof mounts

Downloads