Performance characteristics (according to EN 13241-1):
- Resistance to wind load according to EN 12424
- class 4 (tested with 2500 Pa)
- Air permeability according to EN 12426
- class 3 (<6 m³/hm² at 50 Pa)
- Class 4 (<3 m³/hm² at 50 Pa)
- Thermal insulation according to EN ISO 12428
- UD in W/(m²K)* (Built-in gate 3.5 x 3.5 m)
- PU foam: 1.9 | Mineral wool: 1.8 | Mineral fibre board: 2.0
- Soundproofing according to ISO 717-1*
- PU foam: 26 dB | Mineral wool: 32 dB
- Driving rain tightness according to EN 12425
- with/without lower stop
- PU foam: Class 2 (50 Pa), Class 3 (120 Pa) *Achieved classes depend on the type and equipment of the door
Size range:
- Construction standard dimensions: Width: 2250 - 16000 mm
Height: 2000 - 5000 mm
Door frame:
Side frame made of rectangular tube 50 x 90 mm. Upper frame profile with guide rail (U-profile) and relief level. At the bottom with a lower stop. Installation in the soffit.
Optional equipment:
Installation in front of the reveal. Possible without a lower stop. (For wing coupling ≥ 4 leaves per side, a lower stop is required. For large glazing on request.)
Door leaf:
Made of box-shaped folded steel sheets with a circumferential receptacle for the rubber accident profile (GUP) made of EPDM. With upper and lower sash seal and mounting bracket. Door leaf thickness: 50 mm
- Insulation: PUR-foamed
- surface: pre-coated steel sheet (coil coating) and protective film, primed traffic white similar to traffic white. RAL 9016, sheet thickness: 0.75 mm
- Surface: galvanized sheet steel, sheet thickness: 1.0 mm
- Alternative: Insulation: firmly glued mineral wool
- Surface: galvanized sheet steel, plain sheet metal, sheet thickness: 1.0 mm / 1.5 mm,
- insulation: mineral wool
- Surface: sheet steel galvanized plain, sheet thickness: 1.5 mm
Surface:
- door leaf:
- PU foam filling: pre-coated sheet steel (coil coating) and protective film, primed traffic white based on RAL 9016 or sheet steel galvanised bare
- Mineral wool (firmly glued): sheet steel galvanised bare
- Mineral wool: sheet steel galvanised bare
- RAL colour of your choice as a final coating on the inside of the door and outside
of the door
Special equipment:
- black steel strips / stainless steel
- Gate stops/rubber buffers between the leaves
- Split lock leaf incl. stop seal**
- Wicket door without threshold incl. stop seal**
- Wicket doors with threshold incl. stop seal (not approved for panic exits)
- Wicket door in the middle end leaf with wicket door without threshold
- Panic lock (change function E switch function B, passage function D)
- Air vents, rain plate
- Steel fire brigade folding door:
- with fire brigade release with folding scheme 2:2
- Steel folding door
- with electric drive (dead man's control)
- RAM width 2250 - 4500 mm
- RRM height: 2550 - 4500 mm
- Control for power-operated doors with automatic function according to EN 12453 (type-tested) ** (also with panic function)
