More Over
A substructure system based on UBEKA consists of vertical aluminium T-support profiles, wall brackets, optional accessories, horizontal lug profiles arranged at the distance of the cladding grid and vertical panel support profiles. The wall brackets are made of aluminium or stainless steel, depending on the thermal requirements.
UBEKA allows individual cladding elements to be replaced or retrofitted without having to move the adjacent elements from their already aligned position.
For buildings whose outer walls are not suitable as anchoring grounds, ALKAPO can be used as the basic profile system.
The aluminium T-support profiles are connected to the wall brackets with rivets or screws. Here, sliding points absorb horizontal loads (wind) and fixed points take horizontal and vertical loads (dead weight). In the sliding points, constraint-free installation takes place in vertical slotted holes. A fixed point is arranged for each support profile.
At least two vertical plate support profiles are required for each cladding element, which are connected to the lug profiles.
For easier processing, the wall brackets are optionally equipped with an assembly aid that allows the support profile to be fixed and held.
To minimise thermal bridges, Thermostop elements are available as thermal breaks.
Youtube mounting video can be found ☛ here You can find suitable wall brackets here you can find accessories hereTechnical Information
Projection up to 480 mm.
Material EN AW-6063 T 66
Aluminium system profiles
System accessories
Aluminium T-profiles
In combination with stainless steel wall brackets, a thermal bridge-free construction is possible.
Downloads
