More Over
A substructure system based on NASTO-N consists of vertical L- and T-aluminium support profiles, wall brackets and optional accessories. The wall brackets are made of aluminium or stainless steel, depending on the thermal requirements.
The cladding elements need a groove at the top and bottom edge of the panel.
The construction is particularly suitable for panel formats up to 1500 mm high. Thanks to the horizontal support profile, there are advantages especially when laying in a bond, as the cladding can be effortlessly staggered on the support profiles. The support profiles are connected to the wall brackets with rivets or screws. Here, sliding points absorb horizontal loads (wind) and fixed points take horizontal and vertical loads (dead weight). In the sliding points, constraint-free installation takes place in vertical slotted holes. A fixed point is arranged for each support profile.
For easier processing, the wall brackets are optionally equipped with an assembly aid that allows the support profile to be fixed and held.
To minimise thermal bridges, Thermostop elements are available as thermal breaks.
Youtube mounting video can be found ☛ here You can find suitable wall brackets here you can find accessories hereTechnical Information
Projection up to 480 mm.
Material EN AW-6063 T 66
Aluminium T-profiles
Horizontal aluminium support profiles
Start/end profileMiddle profile
In combination with stainless steel wall brackets, a thermal bridge-free construction is possible.
Downloads
