SYSTEA profile system UBE

Systea GmbH

Description

Profile system for the concealed fastening of large-format façade panels and natural stone slabs by means of agraffes on the back.

UBE is available as:

  • UBE DUO
  • UBE NG

This profile system is suitable for clothing materials from:

Arpa, Carea, Cembrit, Cerashield, Equitone, Eurocem, Florgres, Fundermax, Imola, KME, Lithodecor, Marazzi, Mirage, Mosa, Resopal, Rieder, Rockpanel, Sto, Swisspearl, Taktl and Trespa,

among others.

More Over

A UBE-based substructure system consists of vertical T-aluminium support profiles, wall brackets, optional accessories and horizontal support rails that are arranged at the distance from the cladding grid. The wall brackets are made of aluminium or stainless steel, depending on the thermal requirements.

For buildings whose outer walls are not suitable as anchoring grounds, ALKAPO can be used as the basic profile system.

The support profiles are connected to the wall brackets with rivets or screws. Here, sliding points absorb horizontal loads (wind) and fixed points take horizontal and vertical loads (dead weight). In the sliding points, constraint-free installation takes place in vertical slotted holes. A fixed point is arranged for each support profile.

At least two horizontal mounting rails are required for each cladding element, which are attached to the support profiles with screws or rivets.

The cladding elements are suspended by means of clasps, which are fastened to the back of the cladding elements with special dowels or undercut rivets and anchors. An adjusting screw is used to adjust the height of the clothing.

For easier processing, the wall brackets are optionally equipped with an assembly aid that allows the support profile to be fixed and held.

To minimise thermal bridges, Thermostop elements are available as thermal breaks.

Youtube mounting video can be found ☛ here You can find suitable wall mounts here accessories can be found here
  •  ☛
  •  ☛

Technical Information

Projection up to 480 mm.

Material EN AW-6063 T 66

In combination with stainless steel wall brackets, a thermal bridge-free construction is possible.

Aluminium T-profiles

  • T 40 / 55
  • T 40 / 70
  • T 65 / 50
  • T 80 / 50
  • T 110 / 70

Aluminium clasps

  • type I, II, III for UBE DUO
  • Type I, II, III for UBE Tergo
  • Type I, II, III for UBE NG
  • Type I, II, III for natural stone

Aluminium support profiles

  • UBE DUO
  • UBE Tergo
  • UBE Tergo S
  • UBE NG
  • UBE Natural Stone

Variants

UBE DUO: for HPL, ceramics, porcelain stoneware and fibre-reinforced concrete slabs, even for shallow construction depths and interior applicationsUBE Tergo: for Eternit and other fibre cement panelsUBE Tergo S: for shallow construction depths and interior applicationsUBE NG: for large and/or particularly heavy façade claddingUBE Natural Stone: especially for natural stone

Downloads

Used in Projects