FOAMGLAS PC® EM primer

Pre-treatment of the substrate

The substrate must be clean and free of grease. PC® EM can be applied to dry or damp substrates.

Processing technology

The application can be done with a brush, roller or spraying machine. When spraying PC® EM, measures must be taken against environmental pollution caused by bitumen mist, especially in the case of wind. For facades, the spraying method is generally not recommended.

Delivery form and storage

Store
• containers with 5 kg (net content)
• in a dry, frost-free place, protected from the sun and heat.

Characteristics

• Type: Thick, solvent-free bitumen emulsion
• Base: Bitumen emulsion
• Consistency: liquid
• Application temperature: - 15 °C to + 40 °C
• Processing temperature (air + substrate): min. + 5 °C (not on frozen substrate)
• Drying time: approx. 3 to 12 hours depending on temperature and humidity
• Ash content: at 450 °C approx. 2.7 % by weight, at 900 °C approx. 2.3 % by weight
• Density: approx. 1.04 kg/dm3
• Colour: black
• Water solubility: insoluble after complete drying
• Dry matter at 105 °C: approx. 59 % by weight
• Solvent: no
• VOC: free
• Giscode: BBP 10