More Over
The type of old building insulation that is suitable for your home depends on the type of house. In most cases, however, façade insulation has the greatest effect. Here we particularly recommend our thermal insulation composite system with real clinker brick slips. These façade insulations not only save significant energy and money, but also beautify and significantly increase the value of your property. We rely on polystyrene insulation for our system. This insulating material was particularly convincing in combination with our real clinker slips (no plastic). In addition, these insulations, in combination with our special adhesive mortars and grouts, hold bombproof to the wall. Wall insulation can be done in two variants, one from the inside and one as insulation of the outer wall. We recommend that you insulate the outer wall here. The costs of façade insulation vary from house to house. In addition to the area where the façade thermal insulation is to be installed, the desired clinker brick slip and the number of running meters. corners and plinths play a large and decisive role.
But of course there are other ways to insulate your house. There are different types of insulation that help us save energy. As with the façade, we rely on thermal insulation with polystyrene. For example, the basement ceiling and the floor ceiling can be wonderfully provided with polystyrene insulation. The renovation of the basement ceiling or the floor ceiling is a lot more cost-effective than insulating facades, but it does not save nearly as much energy.
Which insulation and which insulation material is the right one for your home, and above all how high the costs for the insulation ultimately are, depends on the condition of your old building. If you intend to renovate your home in the near future and save on heating costs with modern insulation, please contact us and make an appointment with one of our sales representatives. With the help of special computer programs, he can determine which insulation, insulation materials and renovation measures are best suited for your "old building insulation" project.
Technical Information
CE mark.
EPS-DIN EN 13163 – T2 – L2 – W2 – S2 – P4 – DS(70,-)2 – DS(N)2 – TR 150
Quality
façade insulation board EPS WDV
General approval
Z-23.15-1421
Ü-Zertifikat
Reg.-Nr.: 2008 1498 13
Fire protection
flame retardant B 1 according to DIN 4102 / Euroclass E according to DIN EN 13501-1
Transverse tensile strength.
≥ 150 Kpa according to EN 1607
Shear strength
≥ 50 kPa according to EN 12090
Dimensional stability under normal climate
± 0.2 % according to EN 1603
Irreversible change in length
≤ 0.15 % according to EN 1603
Dimensional stability def. Temp.-F
≤ 2 % according to EN 1604
Water absorption
≤ 0.20 kg/m² according to DIN 1609
Thermal conductivity group
WLG 0.035
Application
WAP (external insulation of the wall)
Edge processing
Step rebate
Thicknesses
40 – 300 mm, others on request
Downloads
