Basic knowledge

Bitumen welding track

Bitumen welding membranes (abbreviation S) are 4 to 5 mm thick bitumen-based waterproofing or vapour barrier membranes that are welded to the substrate with a torch (welding process). Due to the welding process, these membranes are only suitable for heat-resistant substrates and connection areas. Welding membranes are very safe systems, especially when welded over the entire surface, as they prevent condensation or rainwater from penetrating underflow, so that potential damage can be easily located. In addition, the substrate is dried during welding.

 

Bitumen welding membrane as waterproofing membrane: They consist of a carrier insert soaked in bitumen, which is covered on both sides with a layer of oxide bitumen. The carrier layer influences the strength and elasticity, among other things. The bituminous surface layers ensure tightness. Among other things, polyester fleece, glass fabric and glass fleece are offered as inserts. In a multi-layer design and with the right insert, these can also be used in the area of pressurized water. However, DIN 18195-6 only recommends special applications (e.g. in the overhead area or for undercut surfaces), but in practice the type of waterproofing is still often used.

 

Bitumen welding membrane as vapour barrier membrane: A metal insert ensures vapour tightness. The strips are welded over the entire surface or at points to the substrate treated with primer. The joints and seams are welded overlapping.

Source: bauwion